Accessories

The Victron Cerbo GX is an all-round Communications, monitoring & Control Gateway Device.
Multiple VE.Direct inputs & VE.Bus Inputs.
Essential for any solar system with several Victron Components.

The GX Touch 50 is a display accessory for the Victron Cerbo GX. The five inch touch screen display gives an instant overview of your system and allow to adjust settings in the blink of an eye.

The Victron Colour Control GX is the communication-centre of your installation, with Relay's, VE.Direct inputs & VE.Bus Inputs.
Essential for any solar system with several Victron Components.

The BMV-700 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

The BMV-712 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.

A simple and low cost alternative to the VE.Bus BMS.

The VE.Bus BMS and VE.Bus BMS V2 are Battery Management Systems (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery 12,8V & 25,6V Smart (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication.

It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.

The VE.Bus BMS and VE.Bus BMS V2 are Battery Management Systems (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery 12,8V & 25,6V Smart (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication.

It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.

Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect App.

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.

Size: 20mm × 30m
Type : Kapton Tape
Heat Resistance: 280℃

200W 4000k Colour Temperature Highbay Light
Save 50% energy usage over standard highbay lights
Instantaneous start-up
As little as 2 month payback!

Genuine Staubli MC Parallel Connectors Pair,

Includes; 

1 x Male to 2 x Female Socket 

1 x Female to 2 x Male Socket 

Genuine Staubli MC4 Connectors Pair, 1 x Male + 1 x Female 

Battery Temperature Sensor for Studer Xtender range of inverter chargers

Temperature Sensor for PL Series Regulators